Udemy – Hands On Labs Cisco Packet Tracer Switches

What you'll learn
TCP/IP Addressing ,(Public, Private Networks) ,Subnetting/ (TCP,UDP Ports).
What's The Purpose Of A Router And A Switch and Why Need It.
Setup Basic CLI Including HostName,Passwords,UserName, History Size,Banner,Encrypting Passwords.
Configuring IP Address/Description/Duplex/Speed To Interfaces.
How To Break(Hack) Into The Switch.
Backup And Restore Switch Config and IOS To And From A TFTP Server.
What is A MAC Address Table
How To Secure The Switch Using Port Security
What's The Purpose Of The VLANS And How To Route Between Different VLANs (Inter VLAN Routing).
When Do I need VTP and Its Importance on Large Scale Network.
What is an EtherChannel and Its Types (LACP,PAGP).
What is Trunking and Its Purpose On The Switch
What is The Difference between a Switch and a Layer3 Device (Multilayer Switch).
What is The Difference between a Switch and a Hub.
What Are Switch Loops And How To Prevent Them Using STP/RSTP.
Requirements
To Perform All The Labs that i am doing so You would have the actual understanding of How It Works.
Anyone that want to put at least 10 Hours of their Life to learn, enhance and sharpen There Network Skills Using The CLI
A Basic Computer Just To Install Cisco Packet Tracer.
Description
About This Class ( My Entire Course is 100% HANDS ON)If you want to jumpstart your career in IT and networking by acing The CLI For Configuring Switches Than This Course Is For You. I will walk you step by step on how to configure switches from scratch but of course first you need to know the purpose of Network Devices and you will learn how to create your own network from scratch by building custom topologies for different organizations.This is the one course you need Master The CLI. 100% Full lab Simulation is Covered so you'll get the hands-on practical skills as you are working on real world networks.Why This ClassThis Short Course Will be the same as You worked as a Junior Network Engineer For a Company For at least 2 Years. This Class Will be The same as You were Setting Up Cisco Switches In a Real Environment.What Will You Gain From This ClassThis course will teach you and enhance your skills in better understating by actually doing it as we were in the same classroom utilizing Cisco Switches using Cisco Packet Tracer.In This Course you will not just learn you will actually do it yourself as if you were in an actual company and here are the key topics that you will gain from this class.1) What's The Purpose Of A Router And A Switch and Why Need It.2) Setup Basic CLI Including HostName,Passwords,UserName, History Size,Banner,Encrypting Passwords.3) Setting Direct and Remote (Telnet,SSH) Connections To The Switch4) How To Break(Hack) Into The Switch.5) Backup And Restore Switch Config and IOS To And From A TFTP Server.6) Setup A Banner For The Switch.7) What Is an NTP Server.8) What Is AAA.9) What Is The MAC Address Table10) Understanding Of The TCP/IP Classes (Private And Public Networks).11) When Do I need VTP and Its Importance on Large Scale Network.12) TCP/IP Addressing And Subnetting.13) Basic To Advanced Switch CLI. (Learn CLI From Zero To Hero).14) How To Secure Switch Ports Using Port Security15) What's The Difference Between Classful and Classless Networks 16) What Are Switch Loops And How To Prevent Them Using STP/RSTP.17) What is an EtherChannel and Its Types (LACP,PAGP).18) What is Trunking and Its Purpose On The Switch19) How To Configure And Manage A Cisco Switch For Direct And Remote (Telnet,SSH) Connections.20) How To Secure The Switch Using Port Security21) What Are Vlans And InterVlan RoutingWho is This Class For 1) Network Engineers /System Administrators.2) IT Support Techs.3) Help Desk Analyst.4) Any One Who wants to get themselves in The IT Field.Facts About The CourseDo I need any Work experience?If You or Don't Work In The IT Field You Should Be Fine Taking This Course.I Already Work In The IT Field Will I Benefit From This Course?Working In The IT Field Doesn't Mean You Will Cover All Concepts Of Networking.Will I get a certificate of completion at the end?Yes You Will.
Overview
Section 1: Introduction To Course Setup
Lecture 1 Introduction To Entire Course
Section 2: Setup Your Environment For Lab (Cisco Packet Tracer).
Lecture 2 Download And Install Cisco Packet Tracer.
Section 3: Routers Hubs Switches, L3 Switches Broadcast/Collision Domains And Cable Types.
Lecture 3 How Do Hubs And Switches Operate.
Lecture 4 A Switch Or A Multilayer Switch.
Lecture 5 What Is The Purpose Of A Router And Switch.
Lecture 6 What Type Of Cables Are Out There.
Lecture 7 What Is The Difference Between A Broadcast And Collision Domain.
Section 4: TCP/IP Addressing And Ports. (Classful Networks).
Lecture 8 Overview Of All TCP/IP Classes and How Binary and Decimal Work (Part1).
Lecture 9 Overview Of All TCP/IP Classes and How Binary and Decimal Work (Part2).
Lecture 10 Class C
Lecture 11 Class B
Lecture 12 Class A
Lecture 13 Classes D And E
Lecture 14 The Difference Between TCP And UDP Ports. (Part1)
Lecture 15 The Difference Between TCP And UDP Ports. (Part2)
Section 5: Subnetting TCP/IP Classes (Classless Network) (VLSM) Variable Length Subnet Mask
Lecture 16 Subnetting a Class C Network. (Part1)
Lecture 17 Subnetting a Class C Network.(Part2)
Lecture 18 Reverse Engineering Subnetting For Class C.
Lecture 19 Subnetting a Class B Network. (Part1)
Lecture 20 Subnetting a Class B Network. (Part2)
Lecture 21 Reverse Engineering Subnetting For Class B.
Lecture 22 Subnetting a Class A Network. (Part1)
Lecture 23 Subnetting a Class A Network. (Part2)
Lecture 24 Reverse Engineering Subnetting For Class A.
Section 6: How Does An IPV6 Look Like and What Do I understand from it.
Lecture 25 Binary,Decimal,Hexadecimal
Lecture 26 IPV6 And How to Simplify And Follow The Rules
Lecture 27 Global Unicast
Lecture 28 Unique (Site) Local.
Lecture 29 Link Local
Lecture 30 Multicast
Lecture 31 AnyCast
Lecture 32 LoopBack
Lecture 33 Working With Static IPV6 Part1
Lecture 34 Working With Static IPV6 Part2
Section 7: Cisco Switch Basic Commands (Learning The CLI From Scratch).
Lecture 35 Hostname, Enable Secret, Date Time, History Size And Disable IP Domain Lookup
Lecture 36 Interface Config (Duplex,Speed,Description,Display And Shut Down Ports).
Lecture 37 The MAC Address Table
Lecture 38 Storage Types Of The Switch.(RAM,NVRAM,FLASH)
Lecture 39 Configure The Console Line (Direct Connection).
Lecture 40 Configure The VTY Line (Remote Connection Telnet)
Lecture 41 Configure Usernames For Console and Telnet.
Lecture 42 Configure The VTY Line (Remote Connection SSH)
Lecture 43 Setup A Banner For The Switch.
Section 8: Centralize Management And Maintaining Of Routers And Switches.
Lecture 44 TACACS+ Configuration.
Lecture 45 Backup The Router And The Switch Config and IOS To A TFTP Server.
Lecture 46 Restore The Router And The Switch Config From TFTP Server.
Lecture 47 Breaking Into The Router And The Switch.
Section 9: Securing Switch Ports Using Port Security.
Lecture 48 Switch Ports Without Port Security
Lecture 49 Switch Ports Using Port Security Part1
Lecture 50 Switch Ports Using Port Security Part2
Lecture 51 Switch Ports Using Port Security Part3
Lecture 52 Switch Ports Using Port Security Part4
Lecture 53 Switch Ports MAC Address Table
Section 10: Segmenting The Network Using VLANs.
Lecture 54 Switches Without VLANS.
Lecture 55 Switches With VLANs Part1.
Lecture 56 Switches With VLANs Part2.
Lecture 57 Switches With VLANs Part3.
Lecture 58 Switches With VLANs Part4.
Lecture 59 Routing Between Different VLANS Using A Router (Router On A Stick). Part1
Lecture 60 Routing Between Different VLANS Using A Router (Router On A Stick). Part2
Lecture 61 Routing Between Different VLANS Using A Router (Router On A Stick). Part3
Lecture 62 Routing Between Different VLANS Using A Multilayer Switch. Part1
Lecture 63 Routing Between Different VLANS Using A Multilayer Switch. Part2
Section 11: VTP And Its Relation To VLANs.
Lecture 64 VTP Types (Client,Server,Transparent). Part1
Lecture 65 VTP Types (Client,Server,Transparent). Part2
Lecture 66 VTP Types (Client,Server,Transparent). Part3
Section 12: Preventing Switch Loops Using STP/RSTP.
Lecture 67 STP
Lecture 68 RSTP
Section 13: Fault Tolerance For Cables (EtherChannel) Using LACP/PAGP.
Lecture 69 LACP
Lecture 70 PAGP
Section 14: Final Conclusion
Lecture 71 In A NutShell
To Become a Successful Network Engineer,To Enter The IT Field With Real World Experience,To Feel Confidence About Your IT Skills.,To Pass The CCNA Cert

Homepage

https://www.udemy.com/course/hands-on-labs-cisco-packet-tracer-switches/

Download ( Rapidgator )
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part5.rar.html
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part1.rar.html
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part4.rar.html
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part2.rar.html
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part3.rar.html
Fikper
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part3.rar.html
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part1.rar.html
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part4.rar.html
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part5.rar.html
qpslc.Hands.On.Labs.Cisco.Packet.Tracer.Switches..part2.rar.html